| Part Number : AR400 | Manufacturer : United Technologies Corporation | ||
| NSN : 5305-01-007-8756 (5305010078756) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 77445 | ||
| NIIN : 01-007-8756 (010078756) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number AR400, that of which is listed with the description Screw Close Tolerance; Manufactured by United Technologies Corporation and listed alongside the NSN 5305010078756, part number AR400 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AR400 | Manufacturer : United Technologies Corporation | ||
| NSN Number : 5305-01-007-8756 (5305010078756) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 77445 | ||
| NIIN : 010078756 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AR400, that of which is listed with the description Screw Close Tolerance; Manufactured by United Technologies Corporation and listed alongside the NSN 5305010078756, part number AR400 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-007-8756 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010078756 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LS15237-5-13 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.172 INCHES MINIMUM AND 1.202 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
