| Part Number : 488059 | Manufacturer : United Technologies Corporation | ||
| NSN : 5340-00-075-4908 (5340000754908) | |||
| Item Name : Bracket Angle | CAGE Code : 77445 | ||
| NIIN : 00-075-4908 (000754908) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 488059, that of which is listed with the description Bracket Angle; Manufactured by United Technologies Corporation and listed alongside the NSN 5340000754908, part number 488059 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m purification pty limited
CAGE Code: Z5295 |
2is inc
CAGE Code: 1ZKD0 |
|
400hz repair
CAGE Code: 03MS6 |
3 m federal systems dept
CAGE Code: 68352 |
|
3gen corporation
CAGE Code: 3SPS3 |
101communications inc
CAGE Code: 1WS16 |
|
3m touch systems inc
CAGE Code: 0A1V7 |
1343080 alberta ltd
CAGE Code: L0796 |
|
1 source electronic components inc
CAGE Code: 3FY68 |
4m sigma corporation
CAGE Code: 0BC31 |
|
3m quante ag telekommunikation
CAGE Code: D2771 |
451676 ontario ltd
CAGE Code: 38552 |
|
3 com corporation
CAGE Code: 002S5,05PN6,0DPU4,0EWG6,0H6Y3,0L086,0PGJ9,0V0C3,0ZQ35,64034 |
3 star papers limited
CAGE Code: 3DNS9 |
|
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
| Part Number : 488059 | Manufacturer : United Technologies Corporation | ||
| NSN Number : 5340-00-075-4908 (5340000754908) | |||
| Item Name : Bracket Angle | CAGE Code : 77445 | ||
| NIIN : 000754908 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 488059, that of which is listed with the description Bracket Angle; Manufactured by United Technologies Corporation and listed alongside the NSN 5340000754908, part number 488059 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-075-4908 Item PartTypeName: BRACKET,ANGLE | 5340 | 000754908 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3P50004-139 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.930 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 1.000 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 1.950 INCHES NOMINAL |
| AHLG | SECOND LEG CORNER RADIUS | 0.500 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.257 INCHES MAXIMUM |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.950 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.120 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.120 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 2.464 INCHES NOMINAL |
| AHQP | FIRST LEG CORNER RADIUS | 0.280 INCHES NOMINAL |
| AHQW | FIRST LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 1.904 INCHES NOMINAL |
| AHQZ | FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 0.952 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.280 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5363 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
