| Part Number : 585528 | Manufacturer : United Technologies Corporation | ||
| NSN : 5340-00-922-4318 (5340009224318) | |||
| Item Name : Bracket Double Angle | CAGE Code : 77445 | ||
| NIIN : 00-922-4318 (009224318) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 20354 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 585528, that of which is listed with the description Bracket Double Angle; Manufactured by United Technologies Corporation and listed alongside the NSN 5340009224318, part number 585528 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 585528 | Manufacturer : United Technologies Corporation | ||
| NSN Number : 5340-00-922-4318 (5340009224318) | |||
| Item Name : Bracket Double Angle | CAGE Code : 77445 | ||
| NIIN : 009224318 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 585528, that of which is listed with the description Bracket Double Angle; Manufactured by United Technologies Corporation and listed alongside the NSN 5340009224318, part number 585528 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-922-4318 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 009224318 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 585528 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARN | FABRICATION METHOD | MACHINED |
| ADLK | FIRST LEG LENGTH | 0.700 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 1.432 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 1.824 INCHES NOMINAL |
| AHLG | SECOND LEG CORNER RADIUS | 0.312 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| AHLR | SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 1.200 INCHES NOMINAL |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.120 INCHES NOMINAL |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.600 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.312 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.312 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| AHPZ | CENTER SECTION HEIGHT | 1.770 INCHES NOMINAL |
| AHQA | CENTER SECTION WIDTH | 0.500 INCHES NOMINAL |
| AHQB | CENTER SECTION THICKNESS | 0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.500 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| AJFP | FIRST LEG END RADIUS | 0.250 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | END RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSR | SECOND LEG ANGLE | 96.0 DEGREES NOMINAL |
| CSSY | FIRST LEG OFFSET ANGLE | 6.0 DEGREES NOMINAL |
| CSSZ | SECOND LEG OFFSET ANGLE | 6.0 DEGREES NOMINAL |
| MATT | MATERIAL | TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4910 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
