| Part Number : ST1594-10 | Manufacturer : United Technologies Corporation | ||
| NSN : 5340-01-342-4715 (5340013424715) | |||
| Item Name : Clamp Loop | CAGE Code : 77445 | ||
| NIIN : 01-342-4715 (013424715) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: ST159410 | |||
Thank you for taking an interest in part number ST1594-10, that of which is listed with the description Clamp Loop; Manufactured by United Technologies Corporation and listed alongside the NSN 5340013424715, part number ST1594-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : ST1594-10 | Manufacturer : United Technologies Corporation | ||
| NSN Number : 5340-01-342-4715 (5340013424715) | |||
| Item Name : Clamp Loop | CAGE Code : 77445 | ||
| NIIN : 013424715 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number ST1594-10, that of which is listed with the description Clamp Loop; Manufactured by United Technologies Corporation and listed alongside the NSN 5340013424715, part number ST1594-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-342-4715 Item PartTypeName: CLAMP,LOOP | 5340 | 013424715 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST1594-10 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MATT | MATERIAL | IRON ALLOY 660 BAND |
| BZTN | LOOP INSIDE DIAMETER | 0.620 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE BAND |
| ABMK | OVERALL WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.753 INCHES MINIMUM AND 0.813 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.001 INCHES NOMINAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | INCLUDES FABRIC CUSHION,SPEC PWA 484,CAGEC 77445. THIS PART MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES,TOLERANCES,FIT RESTRICTIONS,MATERIALPROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO |
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| ABPX | MATERIAL THICKNESS | 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
