| Part Number : LD111-0044-0812 | Manufacturer : Valley Todeco Inc | ||
| NSN : 5305-01-412-5361 (5305014125361) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06710 | ||
| NIIN : 01-412-5361 (014125361) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: LD11100440812 | |||
Thank you for taking an interest in part number LD111-0044-0812, that of which is listed with the description Screw Close Tolerance; Manufactured by Valley Todeco Inc and listed alongside the NSN 5305014125361, part number LD111-0044-0812 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3 phoenix inc
CAGE Code: 3NJE3 |
28eme groupe geographique
CAGE Code: FAR17 |
|
5 prime 3 prime inc
CAGE Code: 1B2Z0 |
1spatial ltd
CAGE Code: U3518 |
|
451676 ontario ltd
CAGE Code: 38552 |
21st century electronics inc
CAGE Code: 60092 |
|
3d pep
CAGE Code: FB830 |
12 volt shop
CAGE Code: Z0JM2 |
|
2h energy
CAGE Code: F1797 |
3m quante ag telekommunikation
CAGE Code: D2771 |
|
3gen grup trafik ltd
CAGE Code: TB427 |
1 nation technology corp
CAGE Code: 08DH5 |
|
4 cs electronic packaging inc
CAGE Code: 60744 |
3m company communication markets
CAGE Code: 0VGY3 |
|
3m industrial adhesives and tapes
CAGE Code: 0XV20 |
| Part Number : LD111-0044-0812 | Manufacturer : Valley Todeco Inc | ||
| NSN Number : 5305-01-412-5361 (5305014125361) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06710 | ||
| NIIN : 014125361 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number LD111-0044-0812, that of which is listed with the description Screw Close Tolerance; Manufactured by Valley Todeco Inc and listed alongside the NSN 5305014125361, part number LD111-0044-0812 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-412-5361 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014125361 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LD111-0044-0812 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ANEE | GRIP LENGTH | 0.750 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| AASA | THREAD LENGTH | 0.649 INCHES NOMINAL |
| AASL | HEAD DIAMETER | 0.951 INCHES MINIMUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASB | FASTENER LENGTH | 1.384 INCHES MINIMUM AND 1.414 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
