| Part Number : C630-4-11 | Manufacturer : Valley Todeco Inc | ||
| NSN : 5306-00-959-0984 (5306009590984) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 06710 | ||
| NIIN : 00-959-0984 (009590984) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06666 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: C630411 | |||
Thank you for taking an interest in part number C630-4-11, that of which is listed with the description Bolt Internal Wrenching; Manufactured by Valley Todeco Inc and listed alongside the NSN 5306009590984, part number C630-4-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : C630-4-11 | Manufacturer : Valley Todeco Inc | ||
| NSN Number : 5306-00-959-0984 (5306009590984) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 06710 | ||
| NIIN : 009590984 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number C630-4-11, that of which is listed with the description Bolt Internal Wrenching; Manufactured by Valley Todeco Inc and listed alongside the NSN 5306009590984, part number C630-4-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-959-0984 Item PartTypeName: BOLT,INTERNAL WRENCHING | 5306 | 009590984 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5306PL1496305 | 2 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAWC | FIRST DIAMETER FROM HEAD | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.687 INCHES MINIMUM AND 0.707 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 170000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.954 INCHES MINIMUM FIRST HOLE AND 1.045 INCHES MAXIMUM FIRST HOLE |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.367 INCHES MINIMUM AND 0.458 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.074 INCHES MINIMUM AND 1.145 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.253 INCHES MINIMUM AND 0.273 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
