| Part Number : VCG0001-6D35 | Manufacturer : Valley Todeco Inc | ||
| NSN : 5306-01-169-0073 (5306011690073) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 06710 | ||
| NIIN : 01-169-0073 (011690073) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: VCG00016D35 | |||
Thank you for taking an interest in part number VCG0001-6D35, that of which is listed with the description Bolt Close Tolerance; Manufactured by Valley Todeco Inc and listed alongside the NSN 5306011690073, part number VCG0001-6D35 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : VCG0001-6D35 | Manufacturer : Valley Todeco Inc | ||
| NSN Number : 5306-01-169-0073 (5306011690073) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 06710 | ||
| NIIN : 011690073 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number VCG0001-6D35, that of which is listed with the description Bolt Close Tolerance; Manufactured by Valley Todeco Inc and listed alongside the NSN 5306011690073, part number VCG0001-6D35 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-169-0073 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 011690073 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST3M744-6D35 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.371 INCHES MINIMUM AND 0.411 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.569 INCHES MINIMUM AND 2.589 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| AASU | HEAD HEIGHT | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.578 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.111 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ANEE | GRIP LENGTH | 2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.451 INCHES MINIMUM FIRST HOLE AND 2.481 INCHES MAXIMUM FIRST HOLE |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
