| Part Number : VCG0001-6D36 | Manufacturer : Valley Todeco Inc | ||
| NSN : 5306-01-476-6936 (5306014766936) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 06710 | ||
| NIIN : 01-476-6936 (014766936) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: VCG00016D36 | |||
Thank you for taking an interest in part number VCG0001-6D36, that of which is listed with the description Bolt Close Tolerance; Manufactured by Valley Todeco Inc and listed alongside the NSN 5306014766936, part number VCG0001-6D36 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : VCG0001-6D36 | Manufacturer : Valley Todeco Inc | ||
| NSN Number : 5306-01-476-6936 (5306014766936) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 06710 | ||
| NIIN : 014766936 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number VCG0001-6D36, that of which is listed with the description Bolt Close Tolerance; Manufactured by Valley Todeco Inc and listed alongside the NSN 5306014766936, part number VCG0001-6D36 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-476-6936 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 014766936 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST3M744-6D36 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MDCL | Material Document And Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT | Material | STEEL COMP XM-13 OVERALL |
| AAJD | Thread Class | 3A |
| MRC | Decoded Requirement | Clear Text Reply |
| AAWB | Shank Unthreaded Hole Diameter | 0.106 INCHES MINIMUM FIRST HOLE AND 0.111 INCHES MAXIMUM FIRST HOLE |
| AHYM | Nominal Thread Diameter | 0.375 INCHES |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 2.505 INCHES MINIMUM FIRST HOLE AND 2.515 INCHES MAXIMUM FIRST HOLE |
| AGAV | End Item Identification | F18 E/F |
| AASK | Head Style | SPLINE DRIVE SHEAR HEAD |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AASA | Thread Length | 0.391 INCHES NOMINAL |
| CXCY | Part Name Assigned By Controlling Agency | BOLT-CLOSE TOLERANCE, SPLINE DRIVE, CRES (125 KSI FSU)DRILLED,SHORT THREAD |
| THSD | Thread Series Designator | UNJF |
| AAJF | Thread Direction | RIGHT-HAND |
| AAUR | Grip Diameter | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AASB | Fastener Length | 2.613 INCHES MINIMUM AND 2.633 INCHES MAXIMUM |
| CQBC | Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH |
| AASU | Head Height | 0.210 INCHES NOMINAL |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP | Thread Quantity Per Inch | 24 |
| AAZH | Head Minor Diameter | 0.578 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| ANEE | Grip Length | 2.232 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
