| Part Number : 301-121H5K | Manufacturer : Vamistor Corp | ||
| NSN : 5905-00-824-8003 (5905008248003) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 0EBU2 | ||
| NIIN : 00-824-8003 (008248003) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 301121H5K | |||
Thank you for taking an interest in part number 301-121H5K, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Vamistor Corp and listed alongside the NSN 5905008248003, part number 301-121H5K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 301-121H5K | Manufacturer : Vamistor Corp | ||
| NSN Number : 5905-00-824-8003 (5905008248003) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 0EBU2 | ||
| NIIN : 008248003 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 301-121H5K, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Vamistor Corp and listed alongside the NSN 5905008248003, part number 301-121H5K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-824-8003 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008248003 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 930940-18 | 2 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABJT | TERMINAL LENGTH | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| ADAU | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SR-1 | MANUFACTURERS CODE | 94580 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE SINGLE ROW |
| ABHP | III OVERALL LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 930940-18 |
| ABWV | SHAFT DIAMETER | 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ABKW | III OVERALL HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ABTB | MOUNTING HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.076 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION |
| ADAT | BODY WIDTH | 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| FEAT | SPECIAL FEATURES | O-RING SEAL AROUND SHAFT REQUIRED. DEVICE MAY BE SILICONE FILLED |
| AEFK | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES |
| ABMK | III OVERALL WIDTH | 0.445 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.058 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
