| Part Number : 316-64H1K | Manufacturer : Vamistor Corp | ||
| NSN : 5905-00-828-5238 (5905008285238) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 0EBU2 | ||
| NIIN : 00-828-5238 (008285238) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 31664H1K | |||
Thank you for taking an interest in part number 316-64H1K, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Vamistor Corp and listed alongside the NSN 5905008285238, part number 316-64H1K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 316-64H1K | Manufacturer : Vamistor Corp | ||
| NSN Number : 5905-00-828-5238 (5905008285238) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 0EBU2 | ||
| NIIN : 008285238 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 316-64H1K, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Vamistor Corp and listed alongside the NSN 5905008285238, part number 316-64H1K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-828-5238 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 008285238 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 316-64H1K | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 2.053 INCHES MINIMUM AND 2.133 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.185 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.185 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.515 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | UNABLE TO DECODE | UNABLE TO DECODE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 15120.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.272 INCHES MINIMUM AND 0.292 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
