| Part Number : 300-00-153J | Manufacturer : Vamistor Corp | ||
| NSN : 5905-00-864-5023 (5905008645023) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 0EBU2 | ||
| NIIN : 00-864-5023 (008645023) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 30000153J | |||
Thank you for taking an interest in part number 300-00-153J, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Vamistor Corp and listed alongside the NSN 5905008645023, part number 300-00-153J is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 300-00-153J | Manufacturer : Vamistor Corp | ||
| NSN Number : 5905-00-864-5023 (5905008645023) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 0EBU2 | ||
| NIIN : 008645023 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 300-00-153J, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Vamistor Corp and listed alongside the NSN 5905008645023, part number 300-00-153J is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-864-5023 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008645023 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 300-66H15K | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ABHP | III OVERALL LENGTH | 0.217 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.060 INCHES NOMINAL |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| ADAT | BODY WIDTH | 0.187 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| ABXF | SHAFT LENGTH | 0.030 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| APXH | TERMINAL LOCATION | REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| SR-1 | MANUFACTURERS CODE | 28527 |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| ABKW | III OVERALL HEIGHT | 0.500 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 15.000 KILOHMS SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 28527-1064721-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 1064721-1 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
