| Part Number : 522-00HS10K | Manufacturer : Vamistor Corp | ||
| NSN : 5905-01-550-8146 (5905015508146) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 0EBU2 | ||
| NIIN : 01-550-8146 (015508146) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 52200HS10K | |||
Thank you for taking an interest in part number 522-00HS10K, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Vamistor Corp and listed alongside the NSN 5905015508146, part number 522-00HS10K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 522-00HS10K | Manufacturer : Vamistor Corp | ||
| NSN Number : 5905-01-550-8146 (5905015508146) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 0EBU2 | ||
| NIIN : 015508146 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 522-00HS10K, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Vamistor Corp and listed alongside the NSN 5905015508146, part number 522-00HS10K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-550-8146 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 015508146 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| RJR28CP103P | 5 | 8 | E |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.3 FREE AIR SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| AXGY | MOUNTING METHOD | TERMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AAPN | SECTION QUANTITY | 1 |
| ADAT | BODY WIDTH | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.065 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| AAQL | BODY STYLE | RECTANGULAR |
| ABXF | SHAFT LENGTH | 0.090 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.000 |
| ABJT | TERMINAL LENGTH | 0.175 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 589R128 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
