| Part Number : 205-00-20K | Manufacturer : Vernitron Corp | ||
| NSN : 5905-01-301-9491 (5905013019491) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 84048 | ||
| NIIN : 01-301-9491 (013019491) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 2050020K | |||
Thank you for taking an interest in part number 205-00-20K, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Vernitron Corp and listed alongside the NSN 5905013019491, part number 205-00-20K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 205-00-20K | Manufacturer : Vernitron Corp | ||
| NSN Number : 5905-01-301-9491 (5905013019491) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 84048 | ||
| NIIN : 013019491 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 205-00-20K, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Vernitron Corp and listed alongside the NSN 5905013019491, part number 205-00-20K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-301-9491 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 013019491 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 205-00-20K | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| ABTB | MOUNTING HOLE DIAMETER | 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/5.0 SINGLE SECTION |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/50.0 SINGLE SECTION |
| ADAT | BODY WIDTH | 0.192 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
