| Part Number : VRS15-10A2 | Manufacturer : Vernitron Corp | ||
| NSN : 5990-00-127-6749 (5990001276749) | |||
| Item Name : Resolver Electrical | CAGE Code : 10651 | ||
| NIIN : 00-127-6749 (001276749) | |||
| FSC Code : 5990 Synchros and Resolvers | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 22966 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: VRS1510A2 | |||
Thank you for taking an interest in part number VRS15-10A2, that of which is listed with the description Resolver Electrical; Manufactured by Vernitron Corp and listed alongside the NSN 5990001276749, part number VRS15-10A2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : VRS15-10A2 | Manufacturer : Vernitron Corp | ||
| NSN Number : 5990-00-127-6749 (5990001276749) | |||
| Item Name : Resolver Electrical | CAGE Code : 10651 | ||
| NIIN : 001276749 | |||
| FSC CODE : 5990 Synchros and Resolvers | |||
Thank you for taking an interest in part number VRS15-10A2, that of which is listed with the description Resolver Electrical; Manufactured by Vernitron Corp and listed alongside the NSN 5990001276749, part number VRS15-10A2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-127-6749 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 001276749 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VRS15-10A2 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVH | SHOULDER DIAMETER | 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.8500 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.7110 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 2 ROTOR,1 STATOR,1 COMPENSATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 30.0 MAXIMUM |
| AJSP | STATOR INPUT CURRENT RATING | 135.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 700.0 MILLIWATTS MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 1000.0 NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 200.00 NOMINAL |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 81.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 12.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 16.00 NOMINAL |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 32.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.200 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0/5.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0/7.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| AJWH | SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| AJWP | TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R1 POSITION C AND CONNECTION R2 POSITION J AND CONNECTION R3 POSITION D AND CONNECTION R4 POSITION G AND CONNECTION S1 POSITION A AND CONNECTION S3 POSITION B AND CONNECTION C1 POSITION K AND CONNECTION C2 POSITION L |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0510 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 175 SINGLE SHAFT |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES MINIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1870 INCHES MAXIMUM |
| CSJY | TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.185 INCHES SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SCREW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
