| Part Number : 1690-100 | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN : 5905-00-468-2425 (5905004682425) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 91637 | ||
| NIIN : 00-468-2425 (004682425) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 1690100 | |||
Thank you for taking an interest in part number 1690-100, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905004682425, part number 1690-100 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1690-100 | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN Number : 5905-00-468-2425 (5905004682425) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 91637 | ||
| NIIN : 004682425 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 1690-100, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905004682425, part number 1690-100 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-468-2425 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 004682425 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BYYR173 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 0.470 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.320 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.190 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.088 INCHES MINIMUM |
| ABWV | SHAFT DIAMETER | 0.110 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.070 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.320 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.10 INCH-OUNCES |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.0 OHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7920.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 05624-BYZR173 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB,SOLDER LUG |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
