| Part Number : A10W502J | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN : 5905-00-583-0545 (5905005830545) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 91637 | ||
| NIIN : 00-583-0545 (005830545) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number A10W502J, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905005830545, part number A10W502J is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : A10W502J | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN Number : 5905-00-583-0545 (5905005830545) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 91637 | ||
| NIIN : 005830545 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number A10W502J, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905005830545, part number A10W502J is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-583-0545 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 005830545 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A10W502J | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.328 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.205 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.010 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.266 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.205 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.8 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 56232-1001531 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB W/WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
