| Part Number : MD1-30 | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN : 5905-00-707-0774 (5905007070774) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 91637 | ||
| NIIN : 00-707-0774 (007070774) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MD130 | |||
Thank you for taking an interest in part number MD1-30, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905007070774, part number MD1-30 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m singapore pte ltd
CAGE Code: QA095 |
25 canadian forces supply depot
CAGE Code: 35637 |
|
320 matlogpel breda centrale
CAGE Code: H2851 |
1064100 alberta ltd
CAGE Code: L0C80 |
|
1 source electronic components inc
CAGE Code: 3FY68 |
3m espana sa
CAGE Code: 0211B,H7034 |
|
184th air refueling wing
CAGE Code: 3EP27 |
3w interface corp
CAGE Code: 4V367 |
|
20th century fiberglass
CAGE Code: 80241 |
3m co abrasive systems division
CAGE Code: 078Z1 |
|
4 seasons counting systems inc
CAGE Code: 0MHX5 |
3g shielding specialties lp
CAGE Code: 7PCU6 |
|
1 nation technology corp
CAGE Code: 08DH5 |
3m purification inc
CAGE Code: 15472 |
|
3dbm co inc
CAGE Code: 31791,62874 |
| Part Number : MD1-30 | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN Number : 5905-00-707-0774 (5905007070774) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 91637 | ||
| NIIN : 007070774 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number MD1-30, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905007070774, part number MD1-30 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-707-0774 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 007070774 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1320040-11 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPZ | UNABLE TO DECODE | UNABLE TO DECODE |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| ABJT | TERMINAL LENGTH | 0.438 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.062 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.562 INCHES NOMINAL |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -20.0 TO 20.0 |
| AAPP | ELECTRICAL RESISTANCE | 100.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -3.000 TO 3.000 |
| AAQA | HEAT SINK LENGTH | 7.000 INCHES |
| AAQB | HEAT SINK WIDTH | 5.000 INCHES |
| AAQD | HEAT SINK HEIGHT | 2.000 INCHES |
| AAQE | HEAT SINK THICKNESS | 0.040 INCHES |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AAQZ | UNABLE TO DECODE | UNABLE TO DECODE |
| AARB | UNABLE TO DECODE | UNABLE TO DECODE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAU | BODY HEIGHT | 0.562 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.719 INCHES NOMINAL |
| AEFB | POWER DISSIPATION RATING IN WATTS | 12.500 FREE AIR |
| AKNA | INCLOSURE TYPE | ENCASED |
| BYML | MOUNTING HOLE SIZE | 0.125 INCHES NOMINAL |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| MATT | MATERIAL | ALUMINUM ALLOY HEAT SINK |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL (S) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
