| Part Number : PH-10-7 75OHM 1PCT | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN : 5905-00-952-4861 (5905009524861) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 91637 | ||
| NIIN : 00-952-4861 (009524861) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: PH10775OHM1PCT | |||
Thank you for taking an interest in part number PH-10-7 75OHM 1PCT, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905009524861, part number PH-10-7 75OHM 1PCT is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
14 dock drive inc
CAGE Code: 14677 |
331 l tech productions llc
CAGE Code: 01XA0 |
|
4 seasons counting systems inc
CAGE Code: 0MHX5 |
313 aerospace llc
CAGE Code: 3VEK3 |
|
3m espana sa
CAGE Code: 0211B,H7034 |
24 hour distributors
CAGE Code: 12136,3WKM0 |
|
21st century enterprises inc
CAGE Code: 56589 |
2001 micro systemation ab
CAGE Code: SK396 |
|
3 l filters ltd
CAGE Code: 37941 |
357319 ontario ltd
CAGE Code: 38510 |
|
2mb international
CAGE Code: FA7N3 |
400hz repair
CAGE Code: 03MS6 |
|
3d
CAGE Code: 0WY47 |
1st american metals inc
CAGE Code: 0MP49 |
|
3gen corporation
CAGE Code: 3SPS3 |
| Part Number : PH-10-7 75OHM 1PCT | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN Number : 5905-00-952-4861 (5905009524861) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 91637 | ||
| NIIN : 009524861 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number PH-10-7 75OHM 1PCT, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905009524861, part number PH-10-7 75OHM 1PCT is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-952-4861 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 009524861 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| PH10100D75R00F | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 |
| AAPP | ELECTRICAL RESISTANCE | 75.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAPZ | UNABLE TO DECODE | UNABLE TO DECODE |
| AAQA | HEAT SINK LENGTH | 6.000 INCHES |
| AAQB | HEAT SINK WIDTH | 4.000 INCHES |
| AAQD | HEAT SINK HEIGHT | 2.000 INCHES |
| AAQE | HEAT SINK THICKNESS | 0.040 INCHES |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AAQZ | UNABLE TO DECODE | UNABLE TO DECODE |
| AARB | UNABLE TO DECODE | UNABLE TO DECODE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.312 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
| AEFB | POWER DISSIPATION RATING IN WATTS | 5.000 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| AFYE | MOUNTING BUSHING DIAMETER | 0.375 INCHES NOMINAL |
| AKNA | INCLOSURE TYPE | ENCASED |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| MATT | MATERIAL | ALUMINUM ALLOY HEAT SINK |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
