| Part Number : PH10A-10OHMSPORM1PCT | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN : 5905-01-249-7003 (5905012497003) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 91637 | ||
| NIIN : 01-249-7003 (012497003) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: PH10A10OHMSPORM1PCT | |||
Thank you for taking an interest in part number PH10A-10OHMSPORM1PCT, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905012497003, part number PH10A-10OHMSPORM1PCT is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
2mb international
CAGE Code: FA7N3 |
|
1343080 alberta ltd
CAGE Code: L0796 |
4m sigma corporation
CAGE Code: 0BC31 |
|
3h industries inc
CAGE Code: 60754 |
1064100 alberta ltd
CAGE Code: L0C80 |
|
3m norge a s
CAGE Code: N0447 |
14 dock drive inc
CAGE Code: 14677 |
|
20 10 products inc
CAGE Code: 09KC9 |
2 mb distribution
CAGE Code: FAH01 |
|
3m belgium nv
CAGE Code: B2281 |
1 source electronic components inc
CAGE Code: 3FY68 |
|
3 dimensional engineering inc
CAGE Code: 1HLX4 |
3 vets inc
CAGE Code: 1MK20 |
|
3d energy pty ltd
CAGE Code: Z0UA3 |
| Part Number : PH10A-10OHMSPORM1PCT | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN Number : 5905-01-249-7003 (5905012497003) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 91637 | ||
| NIIN : 012497003 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number PH10A-10OHMSPORM1PCT, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905012497003, part number PH10A-10OHMSPORM1PCT is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-249-7003 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 012497003 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| PH10A-10OHMSPORM1PCT | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| AAPP | ELECTRICAL RESISTANCE | 10.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.312 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
| AEFB | POWER DISSIPATION RATING IN WATTS | 5.000 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| AFYE | MOUNTING BUSHING DIAMETER | 0.375 INCHES NOMINAL |
| AKNA | INCLOSURE TYPE | ENCASED |
| CBME | CUBIC MEASURE | 0.150 CUBIC INCHES |
| CSCF | TERMINAL TYPE | WIRE LOOP |
| PKWT | UNPACKAGED UNIT WEIGHT | 6.0 GRAMS |
| STYL | STYLE DESIGNATOR | AXIAL TERMINALS ONE END |
| TEST | TEST DATA DOCUMENT | 26512-GR815ED DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
