| Part Number : PH25A25 5 OHMS P | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN : 5905-01-302-2785 (5905013022785) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 91637 | ||
| NIIN : 01-302-2785 (013022785) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number PH25A25 5 OHMS P, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905013022785, part number PH25A25 5 OHMS P is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3dbm co inc
CAGE Code: 31791,62874 |
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
|
31 mile equipment co
CAGE Code: 07PE3 |
200 park inc
CAGE Code: 3CKS7 |
|
3nity products llc
CAGE Code: 8HDM8 |
21st century electronics inc
CAGE Code: 60092 |
|
526th emxs fabrication
CAGE Code: 69XG4 |
3m touch systems inc
CAGE Code: 0A1V7 |
|
3 v fastener co inc
CAGE Code: 1ER65 |
485 engineering installation group
CAGE Code: 13676,14943 |
|
3 ring inc
CAGE Code: 68310 |
3m purification pty limited
CAGE Code: Z5295 |
|
14 dock drive inc
CAGE Code: 14677 |
136963 canada inc
CAGE Code: 3AD36 |
|
1343080 alberta ltd
CAGE Code: L0796 |
| Part Number : PH25A25 5 OHMS P | Manufacturer : Vishay Dale Electronics Inc | ||
| NSN Number : 5905-01-302-2785 (5905013022785) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 91637 | ||
| NIIN : 013022785 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number PH25A25 5 OHMS P, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Vishay Dale Electronics Inc and listed alongside the NSN 5905013022785, part number PH25A25 5 OHMS P is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-302-2785 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 013022785 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GR815EC25R5H | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| AAPP | ELECTRICAL RESISTANCE | 25.500 OHMS |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.407 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.515 INCHES MINIMUM AND 0.577 INCHES MAXIMUM |
| AKNA | INCLOSURE TYPE | ENCASED |
| CBME | CUBIC MEASURE | 1.199 CUBIC INCHES |
| ABPM | BODY DIAMETER | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| AFYE | MOUNTING BUSHING DIAMETER | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -3.000 TO 3.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| ADAQ | BODY LENGTH | 0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | ID PANEL |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| PKWT | UNPACKAGED UNIT WEIGHT | 22.0 GRAMS |
| STYL | STYLE DESIGNATOR | AXIAL TERMINALS ONE END |
| TEST | TEST DATA DOCUMENT | 26512-GR815EC DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| AEFB | POWER DISSIPATION RATING IN WATTS | 25.000 FREE AIR |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
