| Part Number : 142-0-1-103 | Manufacturer : Vishay Thin Film Llc | ||
| NSN : 5905-00-159-7291 (5905001597291) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 02111 | ||
| NIIN : 00-159-7291 (001597291) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 14201103 | |||
Thank you for taking an interest in part number 142-0-1-103, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Vishay Thin Film Llc and listed alongside the NSN 5905001597291, part number 142-0-1-103 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2101 llc
CAGE Code: 1GH76 |
24 hour distributors
CAGE Code: 12136,3WKM0 |
|
3m nederland b v
CAGE Code: H1248 |
4fastplumber llc
CAGE Code: 4P0W6 |
|
3m aerospace
CAGE Code: R0844 |
2kr systems llc
CAGE Code: 730Z2 |
|
21st century enterprises inc
CAGE Code: 56589 |
200 park inc
CAGE Code: 3CKS7 |
|
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
3 ring inc
CAGE Code: 68310 |
|
485 engineering installation group
CAGE Code: 13676,14943 |
11 30 elo touchsystems inc
CAGE Code: 1CEX6 |
|
3m belgium nv
CAGE Code: B2281 |
3m health care service center
CAGE Code: 0UTW7 |
|
498 msug
CAGE Code: 5VW08 |
| Part Number : 142-0-1-103 | Manufacturer : Vishay Thin Film Llc | ||
| NSN Number : 5905-00-159-7291 (5905001597291) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 02111 | ||
| NIIN : 001597291 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 142-0-1-103, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Vishay Thin Film Llc and listed alongside the NSN 5905001597291, part number 142-0-1-103 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-159-7291 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 001597291 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 142-0-1-103 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.4365 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.495 NOMINAL MILS AND 0.505 NOMINAL CENTIMETERS |
| ABWV | SHAFT DIAMETER | 0.1248 INCHES MINIMUM AND 0.1251 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 NOMINAL MILS AND 0.0670 NOMINAL CENTIMETERS |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.075 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.05 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 80.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.004 INCHES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | 0.123 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT,RATED AMPERES C AND BETTER FLOORING |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 150.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/1.00 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/20.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 7TH SECONDARY QUALITY |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -5.0/5.0 OHMS SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
