| Part Number : 159-36 | Manufacturer : Vishay Thin Film Llc | ||
| NSN : 5905-01-120-4643 (5905011204643) | |||
| Item Name : Resistor Variable Non Wire Wound | CAGE Code : 02111 | ||
| NIIN : 01-120-4643 (011204643) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 15936 | |||
Thank you for taking an interest in part number 159-36, that of which is listed with the description Resistor Variable Non Wire Wound; Manufactured by Vishay Thin Film Llc and listed alongside the NSN 5905011204643, part number 159-36 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 159-36 | Manufacturer : Vishay Thin Film Llc | ||
| NSN Number : 5905-01-120-4643 (5905011204643) | |||
| Item Name : Resistor Variable Non Wire Wound | CAGE Code : 02111 | ||
| NIIN : 011204643 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 159-36, that of which is listed with the description Resistor Variable Non Wire Wound; Manufactured by Vishay Thin Film Llc and listed alongside the NSN 5905011204643, part number 159-36 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-120-4643 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 011204643 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 159-36 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.750 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0607 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.060 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.253 INCHES MINIMUM AND 0.263 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.440 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| APXH | UNABLE TO DECODE | UNABLE TO DECODE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 16000.000 OHMS SINGLE SECTION |
| CQTM | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.2 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.9 TO 1.9 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 98.8 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
