| Part Number : 701-0056 | Manufacturer : Vishay Thin Film Llc | ||
| NSN : 5905-01-321-9382 (5905013219382) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 02111 | ||
| NIIN : 01-321-9382 (013219382) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 7010056 | |||
Thank you for taking an interest in part number 701-0056, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Vishay Thin Film Llc and listed alongside the NSN 5905013219382, part number 701-0056 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4fastplumber llc
CAGE Code: 4P0W6 |
5s components inc
CAGE Code: 1LNJ8 |
|
2101 llc
CAGE Code: 1GH76 |
10zig technology inc
CAGE Code: 49E04 |
|
3 m federal systems dept
CAGE Code: 68352 |
21st century electronics inc
CAGE Code: 60092 |
|
3m france
CAGE Code: F0347 |
3m norge a s
CAGE Code: N0447 |
|
3d robotics llc
CAGE Code: 64TY6 |
3m pharmaceuticals nz ltd
CAGE Code: EA139 |
|
2is inc
CAGE Code: 1ZKD0 |
1 source electronic components inc
CAGE Code: 3FY68 |
|
28eme groupe geographique
CAGE Code: FAR17 |
4 ld inc
CAGE Code: 0ACW5 |
|
5dt inc
CAGE Code: 3BPF1 |
| Part Number : 701-0056 | Manufacturer : Vishay Thin Film Llc | ||
| NSN Number : 5905-01-321-9382 (5905013219382) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 02111 | ||
| NIIN : 013219382 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 701-0056, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Vishay Thin Film Llc and listed alongside the NSN 5905013219382, part number 701-0056 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-321-9382 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 013219382 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LO4265 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 0.30 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/1.00 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/1.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB,SOLDER LUG |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 0.906 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AEFN | NONTURN DEVICE LOCATION | AT 12 OCLOCK |
| AGAV | END ITEM IDENTIFICATION | INSTR DRAW |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | BREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP. |
| ABWV | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.750 INCHES MAXIMUM |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 0.25 INCH-OUNCES |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.25 FREE AIR SINGLE SECTION |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO4265 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
