Part Number : SS2-44 | Manufacturer : W M Berg Inc | ||
NSN : 5310-01-384-2968 (5310013842968) | |||
Item Name : Washer Flat | CAGE Code : 29440 | ||
NIIN : 01-384-2968 (013842968) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 13393 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: SS244 |
Thank you for taking an interest in part number SS2-44, that of which is listed with the description Washer Flat; Manufactured by W M Berg Inc and listed alongside the NSN 5310013842968, part number SS2-44 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : SS2-44 | Manufacturer : W M Berg Inc | ||
NSN Number : 5310-01-384-2968 (5310013842968) | |||
Item Name : Washer Flat | CAGE Code : 29440 | ||
NIIN : 013842968 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number SS2-44, that of which is listed with the description Washer Flat; Manufactured by W M Berg Inc and listed alongside the NSN 5310013842968, part number SS2-44 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-01-384-2968 Item PartTypeName: WASHER,FLAT | 5310 | 013842968 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
AMES-3108-E PC 42 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABNM | Thickness | 0.063 INCHES NOMINAL |
AAUB | Hole Diameter | 0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
MRC | Decoded Requirement | Clear Text Reply |
ADAV | Overall Diameter | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote