| Part Number : 202405-1 | Manufacturer : Walker Power Systems Inc | ||
| NSN : 5340-01-406-7419 (5340014067419) | |||
| Item Name : Clamp Block | CAGE Code : 51913 | ||
| NIIN : 01-406-7419 (014067419) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 37415 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 2024051 | |||
Thank you for taking an interest in part number 202405-1, that of which is listed with the description Clamp Block; Manufactured by Walker Power Systems Inc and listed alongside the NSN 5340014067419, part number 202405-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 202405-1 | Manufacturer : Walker Power Systems Inc | ||
| NSN Number : 5340-01-406-7419 (5340014067419) | |||
| Item Name : Clamp Block | CAGE Code : 51913 | ||
| NIIN : 014067419 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 202405-1, that of which is listed with the description Clamp Block; Manufactured by Walker Power Systems Inc and listed alongside the NSN 5340014067419, part number 202405-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-406-7419 Item PartTypeName: CLAMP,BLOCK | 5340 | 014067419 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 202405-1 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| STYL | STYLE DESIGNATOR | RECTANGULAR |
| ABKW | OVERALL HEIGHT | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CHROMATE |
| BYGG | BLOCK HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| CWTD | CLAMPING HOLE QUANTITY | 1 |
| CWWM | CLAMPING HOLE DIAMETER | 0.250 INCHES NOMINAL SINGLE HOLE |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.493 INCHES MINIMUM AND 0.513 INCHES MAXIMUM |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.218 INCHES MINIMUM AND 0.238 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | HOLES ON BOTTOM PORTION THREADED 10-32 UNF 2B |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8 T6 FED SPEC SINGLE MATERIAL RESPONSE |
| ABTB | MOUNTING HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.218 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.500 INCHES NOMINAL |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
