Part Number : 23082 | Manufacturer : Waltham Clock Co Inc | ||
NSN : 5360-00-544-8534 (5360005448534) | |||
Item Name : Spring Minute Intermediate Lever | CAGE Code : 79300 | ||
NIIN : 00-544-8534 (005448534) | |||
FSC Code : 5360 Coil Flat Leaf and Wire Springs | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 77777 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 23082, that of which is listed with the description Spring Minute Intermediate Lever; Manufactured by Waltham Clock Co Inc and listed alongside the NSN 5360005448534, part number 23082 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 23082 | Manufacturer : Waltham Clock Co Inc | ||
NSN Number : 5360-00-544-8534 (5360005448534) | |||
Item Name : Spring Minute Intermediate Lever | CAGE Code : 79300 | ||
NIIN : 005448534 | |||
FSC CODE : 5360 Coil Flat Leaf and Wire Springs |
Thank you for taking an interest in part number 23082, that of which is listed with the description Spring Minute Intermediate Lever; Manufactured by Waltham Clock Co Inc and listed alongside the NSN 5360005448534, part number 23082 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5360-00-544-8534 Item PartTypeName: SPRING,MINUTE INTERMEDIATE LEVER | 5360 | 005448534 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
22300356 | 6 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | STEEL ALLOY 720 LAST ANNEAL,0.015 IN. DRAW TO 0.010 IN.,HEAT TREAT AT 750 DEG F FOR 2 HR,PASSIVATE FINISH,1 END LOOPED 1.600 IN. W/LONG END 13.600 IN. TO LOOP CENTERLINE AND SHORT END 4.000 IN. TO LOOP CENTERLINE AND 1.000 IN. FROM LONGER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote