Part Number : PD08WRGBGBEB35 | Manufacturer : Warner Robins Air Logistics Center | ||
NSN : 6685-01-570-5253 (6685015705253) | |||
Item Name : Tester Pyrometer An | CAGE Code : 98752 | ||
NIIN : 01-570-5253 (015705253) | |||
FSC Code : 6685 Pressure Temperature And Humidity Measuring And Controlling Instruments | |||
FSG Code : 66 Instruments and Laboratory Equipment | |||
INC Code : 07344 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number PD08WRGBGBEB35, that of which is listed with the description Tester Pyrometer An; Manufactured by Warner Robins Air Logistics Center and listed alongside the NSN 6685015705253, part number PD08WRGBGBEB35 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : PD08WRGBGBEB35 | Manufacturer : Warner Robins Air Logistics Center | ||
NSN Number : 6685-01-570-5253 (6685015705253) | |||
Item Name : Tester Pyrometer An | CAGE Code : 98752 | ||
NIIN : 015705253 | |||
FSC CODE : 6685 Pressure Temperature And Humidity Measuring And Controlling Instruments |
Thank you for taking an interest in part number PD08WRGBGBEB35, that of which is listed with the description Tester Pyrometer An; Manufactured by Warner Robins Air Logistics Center and listed alongside the NSN 6685015705253, part number PD08WRGBGBEB35 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
MRC | Criteria | Characteristic |
---|---|---|
AGAV | III END ITEM IDENTIFICATION | GROUND SUPPORT EQUIPMENT |
FEAT | SPECIAL FEATURES | SHALL BE CAPABLE OF CONNECTING TOAND TESTING MOVEMENT THERMO-COUPLES; METER-MOVEMENT RESISTANCE TEMPERATURE DETECTORS (RTDS); SERVO THERMO-COUPLES ;AND COMMERCIAL THERMO-COUPLES TYPE K/T/J AND TF-30, CASE SHALL BE NO MORE THAN 20 INCHES LONG, 15 INCHES WIDE, AND 15 INCHES HIGH, CASE WILL HAVE A HANDLE ATTACHED AND A LOCKINGMECHANISM P ROVIDED, WEIGHT SHALL BE NO MORE THAN 35 POUNDS; INTERFACE SHALL BE PROVIDEDTHAT WILL DISPLAY VALUES BEING MEASURED OR SOURCED WHILE OPERATING BETWEEN 50 AND 100 DEGREES FARENHEIT, TEMPERATURE CALIBRATOR SHALL HAVE AN ON/OFF POWER SWITCH; BATTERY CHARGE INDICATOR; SOURCE/MEASURE SWITCH; OUTPUT VOLTAGE TUNING ABILITY FROM 0-35VOLTS DOWN TO .5MV OF THE DESIRED OUTPUT; MODE SELECT CAPABILITY; ABILITY TO TEST SINGLE OR DOUBLE RTD INDICATORS; ABILITY TO SOURCE 22.5 OR 28.5 VOLTS PLUS OR MINUS .5MV; ABILITY TO SIMULATE RTD AND SYNCHRO INDICATOR VOLTAGE RANGES, WILL INCLUDE 115/230VAC AT 60HZ POWER CABLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote