| Part Number : 10M079 | Manufacturer : Warwick Electronics Inc | ||
| NSN : 3020-00-200-2067 (3020002002067) | |||
| Item Name : Gear Helical | CAGE Code : 07426 | ||
| NIIN : 00-200-2067 (002002067) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 10M079, that of which is listed with the description Gear Helical; Manufactured by Warwick Electronics Inc and listed alongside the NSN 3020002002067, part number 10M079 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 10M079 | Manufacturer : Warwick Electronics Inc | ||
| NSN Number : 3020-00-200-2067 (3020002002067) | |||
| Item Name : Gear Helical | CAGE Code : 07426 | ||
| NIIN : 002002067 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 10M079, that of which is listed with the description Gear Helical; Manufactured by Warwick Electronics Inc and listed alongside the NSN 3020002002067, part number 10M079 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-200-2067 Item PartTypeName: GEAR,HELICAL | 3020 | 002002067 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 74909761 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 3.0120 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 27.6 ROCKWELL C MINIMUM OVERALL AND 32.1 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.203 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 37.1733 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 1.063 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.435 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.253 INCHES FIRST END |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.862 INCHES BOTH ENDS |
| FEAT | SPECIAL FEATURES | RTIMING MARK ON TOOTH,41 DEG 36 MIN 23 SEC CCW FROM CENTERLINE OF KEYWAY,IDLER GEAR TIMING MARK ON TOOTH 48 DEG CW FROM CENTERLINE OF KEYWAY,TWO PULLER HOLES,3/8-16 UNC 2A,EQUALLY SPACED ON A 2-1/8 IN. DIA BOLT CIRLCE |
| MATT | MATERIAL | STEEL COMP 1141 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL AND AISI/SAF 1141 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | HUBLESS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
