| Part Number : 10M075 | Manufacturer : Warwick Electronics Inc | ||
| NSN : 3020-00-200-2107 (3020002002107) | |||
| Item Name : Gear Helical | CAGE Code : 07426 | ||
| NIIN : 00-200-2107 (002002107) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 10M075, that of which is listed with the description Gear Helical; Manufactured by Warwick Electronics Inc and listed alongside the NSN 3020002002107, part number 10M075 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 10M075 | Manufacturer : Warwick Electronics Inc | ||
| NSN Number : 3020-00-200-2107 (3020002002107) | |||
| Item Name : Gear Helical | CAGE Code : 07426 | ||
| NIIN : 002002107 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 10M075, that of which is listed with the description Gear Helical; Manufactured by Warwick Electronics Inc and listed alongside the NSN 3020002002107, part number 10M075 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-200-2107 Item PartTypeName: GEAR,HELICAL | 3020 | 002002107 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10M075 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | SPOKED |
| AGJS | PITCH DIAMETER | 6.0240 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 48 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.216 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 37.1734 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.156 INCHES FIRST END |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.313 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 1.063 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.0003 INCHES FIRST END |
| CWSN | KEYWAY NOMINAL WIDTH | 0.1584 INCHES FIRST END |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.5953 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 1.875 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.2812 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 1.875 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.2812 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.0625 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TIMING MARK ON 1ST SIDE 170 DEG 26 MIN 51 SEC CCW FROM KEYWAY,TIMING MARK ON 2ND SIDE 116 DEG 34 MIN CCW FROM TIMING MARK ON 1ST SIDE,2 HOLES 5/32 IN. DIA,ONE LOCATED OVER KEYWAY,180 DEG APART |
| MATT | MATERIAL | IRON OVERALL |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB,ONE RECESSED HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
