| Part Number : WC4025L-4D46 | Manufacturer : West Coast Aerospace Inc | ||
| NSN : 5305-00-324-9284 (5305003249284) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 60516 | ||
| NIIN : 00-324-9284 (003249284) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: WC4025L4D46 | |||
Thank you for taking an interest in part number WC4025L-4D46, that of which is listed with the description Screw Close Tolerance; Manufactured by West Coast Aerospace Inc and listed alongside the NSN 5305003249284, part number WC4025L-4D46 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : WC4025L-4D46 | Manufacturer : West Coast Aerospace Inc | ||
| NSN Number : 5305-00-324-9284 (5305003249284) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 60516 | ||
| NIIN : 003249284 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number WC4025L-4D46, that of which is listed with the description Screw Close Tolerance; Manufactured by West Coast Aerospace Inc and listed alongside the NSN 5305003249284, part number WC4025L-4D46 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-324-9284 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 003249284 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST3M454-4LD46 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 3.329 INCHES MINIMUM AND 3.359 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.081 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.2865 INCHES MINIMUM AND 2.885 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.208 INCHES MINIMUM FIRST HOLE AND 3.248 INCHES MAXIMUM FIRST HOLE |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 23-112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
