| Part Number : WC1170C5-6AF | Manufacturer : West Coast Aerospace Inc | ||
| NSN : 5305-01-510-6577 (5305015106577) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 60516 | ||
| NIIN : 01-510-6577 (015106577) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: WC1170C56AF | |||
Thank you for taking an interest in part number WC1170C5-6AF, that of which is listed with the description Screw Close Tolerance; Manufactured by West Coast Aerospace Inc and listed alongside the NSN 5305015106577, part number WC1170C5-6AF is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
25 canadian forces supply depot
CAGE Code: 35637 |
3 com corporation
CAGE Code: 002S5,05PN6,0DPU4,0EWG6,0H6Y3,0L086,0PGJ9,0V0C3,0ZQ35,64034 |
|
3m company health care mfg
CAGE Code: 04515 |
21st century enterprises inc
CAGE Code: 56589 |
|
4 sure com inc
CAGE Code: 1LDH8 |
3m singapore pte ltd
CAGE Code: QA095 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
4m sigma corporation
CAGE Code: 0BC31 |
|
3m telecom system group
CAGE Code: 0Y7Y1 |
4 ld inc
CAGE Code: 0ACW5 |
|
3h industries inc
CAGE Code: 60754 |
3e technologies international inc
CAGE Code: 1DEZ4 |
|
12 volt shop
CAGE Code: Z0JM2 |
2415779 ontario inc
CAGE Code: L09L7 |
|
31 mile equipment co
CAGE Code: 07PE3 |
| Part Number : WC1170C5-6AF | Manufacturer : West Coast Aerospace Inc | ||
| NSN Number : 5305-01-510-6577 (5305015106577) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 60516 | ||
| NIIN : 015106577 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number WC1170C5-6AF, that of which is listed with the description Screw Close Tolerance; Manufactured by West Coast Aerospace Inc and listed alongside the NSN 5305015106577, part number WC1170C5-6AF is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-510-6577 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015106577 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GS1014C5-6AF | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUH | SPLINE MINOR DIAMETER | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASB | FASTENER LENGTH | 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESSS-PH13-8MO (125 KSI SHEAR),INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR) |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| AGAV | III END ITEM IDENTIFICATION | F18 E/F |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488,TYPE II,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AAUJ | SPLINE MAJOR DIAMETER | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.345 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
| ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
