| Part Number : WC1277E4D4A | Manufacturer : West Coast Aerospace Inc | ||
| NSN : 5306-01-536-4429 (5306015364429) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 60516 | ||
| NIIN : 01-536-4429 (015364429) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number WC1277E4D4A, that of which is listed with the description Bolt Close Tolerance; Manufactured by West Coast Aerospace Inc and listed alongside the NSN 5306015364429, part number WC1277E4D4A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : WC1277E4D4A | Manufacturer : West Coast Aerospace Inc | ||
| NSN Number : 5306-01-536-4429 (5306015364429) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 60516 | ||
| NIIN : 015364429 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number WC1277E4D4A, that of which is listed with the description Bolt Close Tolerance; Manufactured by West Coast Aerospace Inc and listed alongside the NSN 5306015364429, part number WC1277E4D4A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-536-4429 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 015364429 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1277E4D4A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FILLISTER COUNTERSUNK |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |
| SUPP | III SUPPLEMENTARY FEATURES | 0.076 INCH DIA COTTER PIN HOLE AT THE TIP OF THE BOLT 0.106 INCH FROM THE END |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEG REDUCED HEAD,GEAR DRIVE RECESS,INCONEL 718 (125 KSI SHEAR),0.0156 INCH OVERSIZE |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| AGAV | III END ITEM IDENTIFICATION | F/A-18 AIRCRAFT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-L-87132,TY 1,GR B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASB | FASTENER LENGTH | 0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASU | HEAD HEIGHT | 0.057 INCHES NOMINAL |
| ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2646 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| FEAT | SPECIAL FEATURES | INTERNAL DRIVE RECESS PER NAS 1800 |
| AASA | THREAD LENGTH | 0.410 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
