| Part Number : 393912 | Manufacturer : Wgi Inc | ||
| NSN : 5315-00-739-3317 (5315007393317) | |||
| Item Name : Pin Shoulder Headed | CAGE Code : 23837 | ||
| NIIN : 00-739-3317 (007393317) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16563 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 393912, that of which is listed with the description Pin Shoulder Headed; Manufactured by Wgi Inc and listed alongside the NSN 5315007393317, part number 393912 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 393912 | Manufacturer : Wgi Inc | ||
| NSN Number : 5315-00-739-3317 (5315007393317) | |||
| Item Name : Pin Shoulder Headed | CAGE Code : 23837 | ||
| NIIN : 007393317 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 393912, that of which is listed with the description Pin Shoulder Headed; Manufactured by Wgi Inc and listed alongside the NSN 5315007393317, part number 393912 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-739-3317 Item PartTypeName: PIN,SHOULDER,HEADED | 5315 | 007393317 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 393912 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| ABPT | SECOND STEP DIAMETER | 0.1395 INCHES MINIMUM AND 0.1400 INCHES MAXIMUM |
| ABPU | SECOND STEP LENGTH | 0.166 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| CRRG | PIN HEAD DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 615 OVERALL |
| AASK | HEAD STYLE | FLAT |
| ABPB | UNDER HEAD LENGTH | 0.460 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| ABPR | FIRST STEP DIAMETER | 0.179 INCHES MINIMUM AND 0.181 INCHES MAXIMUM |
| ABPS | FIRST STEP LENGTH | 0.062 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| ABPV | THIRD STEP DIAMETER | 0.0835 INCHES MINIMUM AND 0.0840 INCHES MAXIMUM |
| ABPW | THIRD STEP LENGTH | 0.218 INCHES MINIMUM AND 0.242 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| CRMG | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 10.0 MICROINCHES LARGE SHANK |
| FEAT | SPECIAL FEATURES | R0.015 IN.MIN 0.025 IN. MAX WIDE,0.044 IN.MIN 0.056 IN. MAX DEEP GRINDING RELIEF UNDER HEAD ON FIRST SHOULDER AND 0.033 IN.MIN 0.037 IN. MAX HOLE THRU SHOULDER 0.082 IN. MIN 0.102 IN. MAX FROM CENTERLINE OF HOLE TO END |
| HGTH | HEIGHT | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
