Part Number : 12293676-3 | Manufacturer : Willard Marine Inc | ||
NSN : 5331-01-096-1751 (5331010961751) | |||
Item Name : O Ring | CAGE Code : 58367 | ||
NIIN : 01-096-1751 (010961751) | |||
FSC Code : 5331 O Ring | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 47946 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: 122936763 |
Thank you for taking an interest in part number 12293676-3, that of which is listed with the description O Ring; Manufactured by Willard Marine Inc and listed alongside the NSN 5331010961751, part number 12293676-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 12293676-3 | Manufacturer : Willard Marine Inc | ||
NSN Number : 5331-01-096-1751 (5331010961751) | |||
Item Name : O Ring | CAGE Code : 58367 | ||
NIIN : 010961751 | |||
FSC CODE : 5331 O Ring |
Thank you for taking an interest in part number 12293676-3, that of which is listed with the description O Ring; Manufactured by Willard Marine Inc and listed alongside the NSN 5331010961751, part number 12293676-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5331-01-096-1751 Item PartTypeName: O-RING | 5331 | 010961751 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
12293676-3 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ADVN | CROSS-SECTIONAL HEIGHT | 0.103 INCHES NOMINAL |
ADYT | CENTER HOLE DIAMETER | 17.270 INCHES NOMINAL |
CQFM | HARDNESS RATING | 70.0 SHORE DUROMETER A NOMINAL |
FEAT | SPECIAL FEATURES | MSPECIFIC GRAVITY 1.38; ULTIMATE TENSILE STRENGTH 900 PSI MIN; ULTIMATE ELONGATION 130 PCT MIN; INCLUDED ON MATERIAL DIAMETER ARE TWO PROTRUSIONS 180 DEGREES APART,BEING 0.005 WIDE BY 0.003 HIGH; USSED ON FVS-TWSS |
MATT | MATERIAL | RUBBER SILICONE CLASS Q |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote