| Part Number : TL2102 | Manufacturer : Williams International Co Llc | ||
| NSN : 5120-01-187-5486 (5120011875486) | |||
| Item Name : Puller Mechanical | CAGE Code : 24235 | ||
| NIIN : 01-187-5486 (011875486) | |||
| FSC Code : 5120 Hand Tools Nonedged Nonpowered | |||
| FSG Code : 51 Hand Tools | |||
| INC Code : 18913 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number TL2102, that of which is listed with the description Puller Mechanical; Manufactured by Williams International Co Llc and listed alongside the NSN 5120011875486, part number TL2102 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TL2102 | Manufacturer : Williams International Co Llc | ||
| NSN Number : 5120-01-187-5486 (5120011875486) | |||
| Item Name : Puller Mechanical | CAGE Code : 24235 | ||
| NIIN : 011875486 | |||
| FSC CODE : 5120 Hand Tools Nonedged Nonpowered | |||
Thank you for taking an interest in part number TL2102, that of which is listed with the description Puller Mechanical; Manufactured by Williams International Co Llc and listed alongside the NSN 5120011875486, part number TL2102 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| SR-5 | MANUFACTURERS CODE | 24235 |
| FEAT | SPECIAL FEATURES | ITEM IS USED DURING DEPOT LEVEL MAINTENANCE TO REMOVE THE AXIAL ASSY FROM THE L.P.SHAFT; WILL BE USED WITH THE SWING TABLE AND SHAFT ADAPTER; IS A CIRCULAR METAL PLATE WITH RAISED EDGE TO ACCOMODATE THE LOWER EDGE OF THE COMMPRESSOR CASE W/A RAISED, RUBBVER COVERED CENTERING RING; THE RING HAS A HOLE IN THE CENTER TO ACCEPT THE SHAFT; THE AXIAL IS PLACED IN THE FIXTURE AND SEPARATED FROM THE SHAFT BY STRIKING ADAPTER AND THEN REMOVED |
| SR-5 | DESIGN CONTROL REFERENCE | TL2102 |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | FIXTURE SHAFT REMOVAL |
| SR-5 | THE MANUFACTURERS DATA |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
