| Part Number : TL2103 | Manufacturer : Williams International Co Llc | ||
| NSN : 5120-01-187-5717 (5120011875717) | |||
| Item Name : Puller Mechanical | CAGE Code : 24235 | ||
| NIIN : 01-187-5717 (011875717) | |||
| FSC Code : 5120 Hand Tools Nonedged Nonpowered | |||
| FSG Code : 51 Hand Tools | |||
| INC Code : 18913 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number TL2103, that of which is listed with the description Puller Mechanical; Manufactured by Williams International Co Llc and listed alongside the NSN 5120011875717, part number TL2103 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TL2103 | Manufacturer : Williams International Co Llc | ||
| NSN Number : 5120-01-187-5717 (5120011875717) | |||
| Item Name : Puller Mechanical | CAGE Code : 24235 | ||
| NIIN : 011875717 | |||
| FSC CODE : 5120 Hand Tools Nonedged Nonpowered | |||
Thank you for taking an interest in part number TL2103, that of which is listed with the description Puller Mechanical; Manufactured by Williams International Co Llc and listed alongside the NSN 5120011875717, part number TL2103 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| SR-5 | MANUFACTURERS CODE | 24235 |
| SR-5 | THE MANUFACTURERS DATA | |
| FEAT | SPECIAL FEATURES | USED DURING DEPOT LEVEL MAINTENANCE OF THE AIR VEHICLE ENGINE TO REMOVE THE SPINNER; IT IS INSTALLED WITH THE PULLER FINGERS ENGAGED IN THE 3 HOLES IN THE SPINNER HOUSING; THE THREADED SHAFT IS TURNED DOWN ONTO THE L.P. SHAFT AND THE SPINNER IS DRAWN OFF THE SHAFT |
| SR-5 | DESIGN CONTROL REFERENCE | TL2103 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
