| Part Number : GD93C | Manufacturer : Wisconsin Motors Llc | ||
| NSN : 3020-00-358-7204 (3020003587204) | |||
| Item Name : Gear Helical | CAGE Code : 66289 | ||
| NIIN : 00-358-7204 (003587204) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number GD93C, that of which is listed with the description Gear Helical; Manufactured by Wisconsin Motors Llc and listed alongside the NSN 3020003587204, part number GD93C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : GD93C | Manufacturer : Wisconsin Motors Llc | ||
| NSN Number : 3020-00-358-7204 (3020003587204) | |||
| Item Name : Gear Helical | CAGE Code : 66289 | ||
| NIIN : 003587204 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number GD93C, that of which is listed with the description Gear Helical; Manufactured by Wisconsin Motors Llc and listed alongside the NSN 3020003587204, part number GD93C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-358-7204 Item PartTypeName: GEAR,HELICAL | 3020 | 003587204 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GD93C5 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 2.5310 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.631 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 18.7665 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.0360 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.465 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.624 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.938 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TONE GROOVE 0.312 IN. MIN 0.315 IN. MAX W 1ST END ON BODY OF GEAR,TIMING MARK LOCATED 1.125 IN. FROM CENTER OF BORE 9 DEG 10 MIN CCW FROM CENTERLINE OF GROOVE ON 2ND END,FIGURE X ON FACE OF GEAR TOOTH 135 DEG CW FROM TIMING MARK |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,C1113,C1115,C1117 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
