| Part Number : 127P726 | Manufacturer : Xerox Corporation | ||
| NSN : 3010-01-040-2968 (3010010402968) | |||
| Item Name : Gearcase Motor | CAGE Code : 26921 | ||
| NIIN : 01-040-2968 (010402968) | |||
| FSC Code : 3010 Torque Converters and Speed Changers | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 01102 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 127P726, that of which is listed with the description Gearcase Motor; Manufactured by Xerox Corporation and listed alongside the NSN 3010010402968, part number 127P726 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 127P726 | Manufacturer : Xerox Corporation | ||
| NSN Number : 3010-01-040-2968 (3010010402968) | |||
| Item Name : Gearcase Motor | CAGE Code : 26921 | ||
| NIIN : 010402968 | |||
| FSC CODE : 3010 Torque Converters and Speed Changers | |||
Thank you for taking an interest in part number 127P726, that of which is listed with the description Gearcase Motor; Manufactured by Xerox Corporation and listed alongside the NSN 3010010402968, part number 127P726 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-01-040-2968 Item PartTypeName: GEARCASE-MOTOR | 3010 | 010402968 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 127P726 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 5.520 INCHES |
| AAJU | OVERALL LENGTH | 9.120 INCHES |
| AAJV | OVERALL WIDTH | 5.060 INCHES |
| ACDC | CURRENT TYPE | AC INPUT |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | GENERAL PURPOSE |
| AXCP | WINDING TYPE | REPULSION-INDUCTION |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPH | TORQUE RATING AND TYPE | 3.6 FOOT-POUNDS RUNNING |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL DIFFERENTIAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | 0.0666 HORSEPOWER OUTPUT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 1.120 INCHES SINGLE END |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.221 INCHES SINGLE END |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.020 INCHES |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.360 INCHES |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 43.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| FAAZ | PHASE | SINGLE INPUT |
| FEAT | SPECIAL FEATURES | SHAFT END SQUARE KEYED AND SPLINED ON 75 PCT OF END |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
