| Part Number : MS21122-C7 | Manufacturer : Zf Industrieantriebe Witten Gmbh | ||
| NSN : 5340-01-096-2880 (5340010962880) | |||
| Item Name : Clamp Loop | CAGE Code : D9182 | ||
| NIIN : 01-096-2880 (010962880) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: MS21122C7 | |||
Thank you for taking an interest in part number MS21122-C7, that of which is listed with the description Clamp Loop; Manufactured by Zf Industrieantriebe Witten Gmbh and listed alongside the NSN 5340010962880, part number MS21122-C7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS21122-C7 | Manufacturer : Zf Industrieantriebe Witten Gmbh | ||
| NSN Number : 5340-01-096-2880 (5340010962880) | |||
| Item Name : Clamp Loop | CAGE Code : D9182 | ||
| NIIN : 010962880 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number MS21122-C7, that of which is listed with the description Clamp Loop; Manufactured by Zf Industrieantriebe Witten Gmbh and listed alongside the NSN 5340010962880, part number MS21122-C7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-096-2880 Item PartTypeName: CLAMP,LOOP | 5340 | 010962880 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1715 | 5 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMK | OVERALL WIDTH | 0.375 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.623 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.811 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| MATT | MATERIAL | PLASTIC CUSHION |
| MATT | MATERIAL | STEEL COMP 321 BAND OR STEEL COMP 347 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-403 FED SPEC SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC ALL MATERIAL RESPONSES BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
